Products: Harness Hardware

Stainless 2″ belt buckle

Description The Highseas Utility Keeper is ideal for holding down backup lights but can also be used on the shoulder strap to retain your inflator hose.

At .07” in thick the KP-1, KP-11/2, and KP-2 are almost double the thickness of other metal keepers. L, 2″ (KP-2) M, 1.5″ (KP-1 1/2) S, 1″ (KP-1)

Description The Polygon effectively manages the intersection of the shoulder strap, sternum strap and lower chest strap. If you have ever struggled to don a harness that used 2″ round rings at this location, you will enjoy the effortless freedom …

Description Fixed Waist Staging Ring is the complimentary partner to the Shoulder Drop Dee (SR-1). Used as upper and lower clip-off locations for slinging bottles, together they allow the diver efficient one-handed stage bottle management. Hunting for the D-ring with …



Description The SR-1 is a rigid, easy to hit ring with only 1-1/4″ of standoff at approximately 10°, yet it will accommodate the largest clips and carabineers. It offers the most efficient means for slinging bottles to the harness. Especially …

Description 1″ by 2″ Dee ring welded to a keeper at a 90°

1″ by 2″ Dee ring welded to a keeper slight angle.

Description 1” Loop welded to the end of a 2” keeper.

Description Low profile 2″ Dee Ring, popular with bare handed warm water divers. Approximately 1 ¼” overall height. Readily accepts 2″ webbing. Constructed from 3/16″ stainless steel rod, fusion welded closed, polished finish.

Description This standard of the diving harness readily accepts all sizes of web. Available in: 1″ (D1) 1.5″ (D11/2) 2″ (D2)